Information about buying Walbro Fuel Pumps from Fuel-Pumps.Net Contact the Fuel-Pumps.net team! View your Fuel-Pumps.Net Shopping Cart  

Walbro FRC-8 Industrial Fuel Pump

Walbro FRC-8 Industrial Fuel Pump - click to enlarge
Walbro FRC-8 Industrial Fuel Pump
Item Code:
Availability: Usually ships the next business day

Outlet Adapter (1/8 in. MPT to 5/16 in. Hose Barb)

Inlet Adapter (1/8 in. MPT to 5/16 in. Hose Barb)



The FRC family of industrial fuel pumps from Walbro are a good place to look to satisfy carbureted, diesel lift, transfer pump as well as fuel polishing applications. The Walbro FRC-8 Fuel Pump is a 12 volt DC pump with an outlet check valve and integrated 70-micron fuel filter. When used in carbureted applications, it is critical that the pump be mounted at least 12 inches below the carburetor, to prevent fuel siphoning in the event of carburetor needle valve or float failure. Its aluminum body resists salt spray up to 96 hours, but one of Walbro's marine pumps may be a better choice for saltwater applications. This pump supersedes the Walbro 6103-2 Fuel Pump, which is discontinued.

Note that while the picture above shows unterminated leads, the FRC8-1 has leads that are terminated with a Packard connector, which can be easily clipped if another arrangement is desired.

All Walbro Marine and Industrial Fuel Pumps Feature:

  • Low Current Draw
  • Reverse-Polarity Protected up to 60 minutes
  • Self-Priming (Dry Lift) of more than 48" (120 cm)
  • Dry Run to Four Hours
  • Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
  • Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
  • Protection from Transient Voltages to 100 vdc
  • US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
  • European CE Standard Approved (EN 61000-6-2 and EN 63-2100)

Additionally, all Walbro FRC-Series Pumps Feature:

  • Continuous Duty Life Over 10,000 Hours (Diesel Fuel)
  • Weight of 1.83 lbs (0.83 Kg)
  • Pump Cycles Continuously When Powered
  • Replaceable Filter

FRC-8 Pump Specifications:

Voltage: 12vdc
Minimum Flow: 28 gph
Deadhead Pressure: 9.0 to 12.0 psi
Max Current Draw: 2.3 amps
Life: >10000 Hours
Dry Lift: 48"
Inlet/Outlet: 1/8-27 NPSF
Electrical Connector Two Leads, Packard Electrical Connector
Inlet Filter Screen: 70 Micron
Corrosion Resistance: 96 Hours Salt Spray Test (ATSM B-117)
Outlet Check Valve: Yes

Image of Mounting Flange and Included Components

Drawing of Mounting FlangeIncluded Components

300-102x Replacement Filter Screens for Walbro FRB and FRC Pumps
Retail price: $9.65

You pay: $8.69
Redline Fuel Pressure Regulator (1.5 to 20 PSI)
Retail price: $103.16

You pay: $87.95

Get the fuel pump you need - now!
©Copyright 2009 Fuel-Pumps.net, All Rights Reserved