%SITELOADPOPUP%
  Fuel-Pumps.net      
   
  Information about buying Walbro Fuel Pumps from Fuel-Pumps.Net Contact the Fuel-Pumps.net team! View your Fuel-Pumps.Net Shopping Cart  
       
 

Walbro FRB-15 Industrial & Marine Fuel Pump

Walbro FRB-15 Industrial & Marine Fuel Pump - click to enlarge
Walbro FRB-15 Industrial & Marine Fuel Pump
Item Code:
FRB-15
Availability: Usually ships the next business day

Outlet Adapter (1/4 in. MPT to 5/16 in. Hose Barb)


Inlet Adapter (1/4 in. MPT to 5/16 in. Hose Barb)


$222.51

$158.64
Qty: 


The Walbro FRB-15 Industrial Fuel Pump is one of six FR Series pumps that are built for 24 volt operation. The higher voltage means even lower amperage draw, only 1.7 amp. Like all but one other 24-volt FR pumps, it is Coast Guard approved for Marine use, and features a 1000-hour salt spray test resistance. As such, it is very similar to the FRB-19, but that pump supports a lower 2-4 PSI pressure, while this one supports pressures from 6-8 PSI. It is compatible with virtually all pump gasoline, including E85, diesel, and bio-diesel. This pump supersedes the Walbro 6052 Fuel Pump, which is discontinued.

Note that the FRB-15 has a single positive lead with a bullet connector, with it's negative lead grounded to the body of the pump, which is different than what is shown in the picture. For an identical pump with separate positive and negative leads, see the FRB-17.

All Walbro Marine and Industrial Fuel Pumps Feature:

  • Low Current Draw
  • Reverse-Polarity Protected up to 60 minutes
  • Self-Priming (Dry Lift) of more than 48" (120 cm)
  • Dry Run to Four Hours
  • Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
  • Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
  • Protection from Transient Voltages to 100 vdc
  • US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
  • European CE Standard Approved (EN 61000-6-2 and EN 63-2100)

Additionally, all Walbro FRB-Series Pumps Feature:

  • Continuous Duty Life Over 18,000 Hours (Diesel Fuel)
  • Weight of 1.83 lbs (0.83 Kg)
  • Pump Cycles Only On Fuel Demand
  • Replaceable Filter

FRB-15 Pump Specifications:

Voltage: 24vdc
Minimum Flow: 34 gph
Deadhead Pressure: 6.0 - 8.0 psi
Max Current Draw: 1.7 amps
Life: >18000 Hours
Dry Lift: 48"
Inlet/Outlet: 1/4-18 NPSF
Electrical Connector Single Lead (Negative Grounded to Case), Bullet Connector
Inlet Filter Screen: 70 Micron
Corrosion Resistance: 1000 Hours Salt Spray Test (ATSM B-117)
Outlet Check Valve: None

Image of Mounting Flange and Included Components

Drawing of Mounting FlangeIncluded Components


300-102x Replacement Filter Screens for Walbro FRB and FRC Pumps
Retail price: $9.65

You pay: $8.69
Redline Fuel Pressure Regulator (1.5 to 20 PSI)
Retail price: $103.16

You pay: $87.95

Get the fuel pump you need - now!
©Copyright 2009 Fuel-Pumps.net, All Rights Reserved