Walbro FRA-2 Industrial Fuel Pump
The Walbro FRA-2 Industrial Fuel Pump work great in applications where a continuously-running pump is acceptable, including heater and stove applications. Its lifetime is expected to exceed 5000 hours and it has relatively low battery current draw. It is capable of flowing as much as 16 gallons per hour against a pressure of 2.5 to 4.5 PSI. There is no internal filter on the FRA-2, so a prefilter, either in-line or in-tank, is required when using this pump. The FRA-2 pump is a great choice to replace the discontinued Walbro 2402 or any of these other common fuel pumps.
All Walbro Marine and Industrial Fuel Pumps Feature:
- Low Current Draw
- Reverse-Polarity Protected up to 60 minutes
- Self-Priming (Dry Lift) of more than 48" (120 cm)
- Dry Run to Four Hours
- Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
- Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
- Protection from Transient Voltages to 100 vdc
- US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
- European CE Standard Approved (EN 61000-6-2 and EN 63-2100)
Additionally, all Walbro FRA-Series Pumps Feature:
- Continuous Duty Life Over 5,000 Hours (Diesel Fuel)
- Weight of 1.63 lbs (0.74 Kg)
- Pump Cycles Continuously When Powered
Walbro FRA2 Pump Specifications:
Voltage: |
12vdc |
Minimum Flow: |
16 gph |
Deadhead Pressure: |
2.5 to 4.5 psi |
Max Current Draw: |
2.0 amps |
Life: |
>5000 Hours |
Dry Lift: |
24" |
Inlet/Outlet: |
1/8-27 NPSF |
Electrical Connector |
Two leads, no connector |
Inlet Filter Screen: |
NA |
Corrosion Resistance: |
96 Hours Salt Spray Test (ATSM B-117) |
Outlet Check Valve: |
None |
Image of Mounting Flange and Included Components
 |  |
 |
  Retail price: $103.16
You pay: $94.98 |
 |